The Veu Home Elevator by Vertechs
Veu Technical Specifications
Download PDF of Veu Technical Specifications
General Specifications
- Drive: 2:1 Hydraulic System
- Capacity: 950lbs (430kg)
- Total Gross Load: 1900 lb. (863 kg)
- Speeds: 32 fpm or 40 fpm
- Pit: 10in. (254mm) Min. / 36in. (915mm) Max.
- Overhead: 108in. Min. (2744mm)
- Travel: 504in. (42ft) Max. (12800mm)
- Stops: 5 Max.
Cab Clear Inside
- 36in X 48in X 84in. (12sq ft)
- 36in X 60in X 84in. (15sq ft)
Standard Equipment
- Cab Entrance: Steel (black enamel)
- Cab Doors: 2-speed fully-automatic sliding doors (Powder coated beige)
- Landing entrance: Powder coated beige
- Landing Doors: 2-speed fully-automatic sliding doors (Powder coated beige)
- Door Sills: Clear Aluminium
- Handrail: Clear Aluminium (Brushed Finish)
- Cab Panels: Wood Veneer (stained/lacquer or unfinished) or Plastic Laminate with (Formica finishes)
- Cab Ceiling: Wood Veneer (stained/lacquer or unfinished)
- Plastic Laminate with (Formica finishes)
- Lighting: automatic on/off (2 pot lights)
- Operation: Selective Collective
- Call Stations: Brushed Stainless Steel c/w illuminated Push buttons
- Car Operating Panel (C.O.P): Brushed Stainless Steel c/w illuminated push buttons, stop switch, emergency light and programmable speakerphone
Standard Safety Features
- Backup Systems: Automatically lowers the car to bottom landing and open doors during power failure
- Emergency Lowering: Manual lowering button
- Emergency Stop: Emergency stop switch inside car
- Automatic Door Interlocks: CSA/UL approved interlocks
- Preventing landing door opening when car not at the floor)
- Door Restrictor: Mechanical-Magnetic restrictor
- Preventing cab door opening when car not at the landing)
- Line Rupture Valve (LRV): Flow control safety valve
- Auto Re-levelling: Anti-Creep relieving system
- Door-bypass Detection: Detects bypass of door contacts
- Slack Rope Safety: Mechanical safety breaks for rope stretching or breaking
- Micro-Scan Motion Detectors: (Light Curtains) detects objects in front of doors and automatically reopens doors
Mechanical / Hydraulic
- Guide Rails: 8lb T-rail (pre-welded for precise alignment)
- Car Frame: T-601 Cantilever system
- Power Unit: GMV Ultima
- Motor/Pump: Submersible for quiet operation
- Control Valve: 2 speed with soft stop
- Jack: Single Stage with LRV system
Controls
- Elevator Controller: CSA/TSSA approved Micro-controller based system with solid-state devices (no mechanical relays)
- Wiring: Plug and play harness c/w electrical duct
Power Req.
- Main and Lighting: single phase, 220V and 110V
Options
- Cab Doors: Stainless Steel (Brushed Finish)
- Landing entrance & Doors: Stainless Steel (Brushed Finish)
- Door Sills: Aluminium with brass-like Anodized
- Handrail: Solid Oak (stained/lacquer or unfinished)
- Solid Brass (brushed finish)
- Cab Wall Panels: Raised Solid Wood (Stained/lacquer or unfinished)
- Light Trims: 6 different colours to choose from
- Call Stations: Brass (Brushed Finish)
- Car Operating Panel (C.O.P): Brass (Brushed Finish)
Additional Information
- Limited two year warranty
- Job Specific Layout Drawings
- Detailed Architectural Hoist-way Construction Drawings
- Optional Maintenance Service
- Full pre-tested system
- Installation and Service provided by local dealer
- On time delivery